| | |
|
| |
| | |
|
|
Newport iLD-C2 & iLD-EI Serial Input Panel Meter
|
Item Number: iLD-C2
Manufacturer: Newport Electronics
Part Number: iLD-C2
Product Options
* denotes required field
Size of Digit Display Selection*
You must select an option for 'Size of Digit Display Selection'.
Input Type Options*
You must select an option for 'Input Type Options'.
* Whole number only
|
|
Newport iLD-C2 & iLD-EI Serial Input Panel Meter
The "Serial RS232 BIG Remote Display" (iLD-C2) are 4 or 6 digit slave displays providing remote readout from instruments such as programmable controllers, digital panel meters and other instruments with serial output. Two communication interfaces are supported in Remote Display: RS232 and RS485 and can be programmed through front panel buttons.
The iLD-C2 can display data transmitted via serial communications from a computer, or from other devices which transmit ASCII data via RS232 and RS485. These BIG Displays are compatible with virtually all NEWPORT® devices that feature serial communications including: iSeries meters and controllers, INFINITY® digital panel meters, MICRO-INFINITY® controllers, iDRX DIN-RAIL mounted signal conditioners, and many more.
The "Ethernet BIG Remote Display" (iLD-EI) are 4 or 6-digit slave displays providing remote readout from instruments with an Ethernet output or display data from a computer.
The iLD-EI can display data transmitted via Ethernet from Newport instruments that have an Ethernet output option, (iSeries with -EI). You can tunnel or display the same data from a computer using telnet. Any two units with Ethernet option (iSeries with -EI or iServer) can talk to each other over the Ethernet LAN, WAN, and Internet using TCP/IP protocol. This allows the connected serial devices to an iServer to communicate with each other back and forth over TCP/IP networks.
Programmable Color Display
The iLD-C2 and iLD-EI feature BIG bright 7-segment LED's that can be programmed to change colors between RED, AMBER, and GREEN to indicate visual alarms.
In the "slave" mode, the BIG remote displays can be used for displaying alphanumerical characters from a computer using serial connection (iLD-C2) or Telnet (iLD-EI). Compatible Host device must feature serial RS232 or RS485 output.
Features
- BIG Bright 2.25" (57.2 mm) or 4.00" (101.6 mm) LEDs
- BIG 7-segment LEDs, 4 or 6-Digits
- Program to Change Colors: RED, AMBER, GREEN
- RS232/RS485 Input
- Ethernet Input
Technical Specifications
Ethernet Input (Model EI)
Temperature Stability: 50 ppm/°C
Alarm: Alarm 1 and 2 programmable,
latch/unlatch, high, low, high/low
Standards Compliance: IEEE 802.3,
10 Base-T
Supported Protocols:
TCP/IP, ARP, HTTPGET
Network Interface: 10 Base-T port
(RJ45 connector)
Socket Port Number: 1000, 2000
HTTP Port Number: 80
Serial Communications Input (Model C2)
Temperature Stability: 50 ppm/°C
Alarm: Alarm 1 and 2 programmable,
latch/unlatch, high, low, high/low
Communication Standard: RS-232/
RS-485
Transfer Speed (Baud Rate): 300, 600,
1200, 2400, 4800, 9600, 19200 bps
Data Format:
7O1-7 Bit: Odd, 1 stop bit
7E1-7 Bit: Even, 1 stop bit
8N1-8 Bit: No parity, 1 stop bit
General
Power:
100 to 240 Vac ±10%, 50/60 Hz, 22.5 W
Environmental Conditions: 0 to 40°C
(32 to 104°F), 90% RH non-condensing
Protection: NEMA 4 (IP65) front bezel
Dimensions
iLD24: 289 L x 137 W x 73 mm D
(11.75 x 5.375 x 2.875")
iLD26: 394 L x 137 W x 73 mm D
(15.50 x 5.375 x 2.875")
iLD44: 480 L x 211 W x 95 mm D
(18.11 x 8.31 x 3.76")
iLD46: 642 L x 211 W x 95 mm D
(25.26 x 8.31 x 3.76")
|
Product Reviews
|
|