Gas Detection and Measurement Instruments

Measuring only 6" in length with a 12" flexible probe, Bacharach's Leakator Jr. is a low maintenance, easy-to-use portable combustible gas leak detector that is capable of pinpointing large and small leaks quickly with absolutely no calibration.

Amprobe GSD600 Gas Leak Detector is a fast responding gas leak detector for methane and propane gas. The meter emits a frequency tone when gas is detected.

Amprobe CM100 is a compact size carbon monoxide (CO) meter for measuring and displaying the presence of carbon monoxide.

The Extech CO10 is a hand held test instrument to measure CO to 1000 ppm.

UEI LPKIT combines the two most useful instruments for the tank-to-house installer of LP equipment. Check primary resolution pressures and verify fittings are leak free. The Pro kit option adds the CO71A CO meter.

The Extech CO200 measures Carbon Dioxide (CO2), Air Temperature, and Humidity with user-selectable high/low alarms.

Amprobe CO2-100 is a handheld carbon dioxide meter with measuring range of 5001 ~ 9999 ppm (out of scale range).

Fluke CO-220 Carbon Monoxide Meter makes it easy to take quick and accurate measurements of CO levels with a single compact instrument. CO-220 responds very quickly to ambient changes in carbon monoxide concentration without the use of a pump.

The Extech CO250 measures Carbon Dioxide (CO2), Temperaure, Humidity, Dew Point, and Wet Bulb. The CO250 calculates statistical 8 hour and 15 minute time weighted averages.

The Extech EA80 indoor air quality meter measures and records CO2 , Temperature, Humidity, Dew Point, and Wet Bulb

The Vaisala GM70 CARBOCAP® hand-held carbon dioxide Meter measures volume of CO2 gas and reads in ppm or %.

The REED SD-9901 measures relative humidity, temperature, CO and CO₂ levels, as well as oxygen in air while allowing the readings to be stored on an SD memory card for easy transfer to a PC spreadsheet program.