Mailing Lists
Browse by Manufacturer
Browse Categories

Additel Online Store

Ametek Online Store


Extech Online Store

Fluke Online Store



Martel Beta Online Store

Reed Instruments Online Store

Newport 201AN Low-Cost 3-1/2 Digit AC Voltage Power Line Monitor

Our Price: $190.00
Item Number: 201AN-AC
Manufacturer: Newport Electronics
Part Number: 201AN-AC

Product Options

* denotes required field

Signal Input Range Selection*
Power Selection*
Display LEDs Color Selection*
Newport Logo Option*
Panel Meter NIST Calibration & Scaling*
If Ordering Calibration and Scaling, Please Specify Input Signal and Scale
Answer
Newport 201AN Low-Cost 3-1/2 Digit DC Voltmeters

Newport 201AN Low-Cost 3-1/2 Digit AC Power Line Monitor

Model 201AN-AC is a low-cost, compact 3 1/2 digit panel meter for AC power line monitoring.  Power and Signal Pinout Compatible with Model 2001A.  It uses a half-wave rectifier calibrated to read the RMS value of sinusoidal signals. 

Two input ranges are jumper- selectable: 50.0 to 199.9 Vac with 100 mV resolution and accuracy optimized for 115 Vac, and 50 to 650 V with 1 V resolution and accuracy optimized for 230 Vac. The meter fits a standard 1/8 DIN panel cutout 3.62" x 1.77" (92 x 45 mm) and requires a depth of less than 4.1" (104 mm) behind the panel.  A screw-terminal barrier strip for signal and power is standard.

Features:

  • 50.0 to 199.9 Vac Range (100 mV Resolution)
  • 50 to 650 Vac range (1 V Resolution)
  • Bright, 0.56 in (14.2 mm) LED display
  • Automatic zero
  • Display hold and test
  • Screw-terminal barrier strip
  • Short 4.1" (104 mm) Deep 1/8 DIN Case

Options:

  • Isolated 9-32 Vdc power
  • Isolated 26-56 Vdc power


Technical Specifications:

Specifications:
Noise Rejection (AC GND to SIG GND)
CMR: 120 dB, DC to 60 Hz
CMV: 1500 Vp per HV test, 354 Vp per IEC spacing

Accuracy at 25C (10% to 100% of full-scale range)
Maximum error (reading - actual): 50.0 to 199.9 V range: +/-0.006 (R-115 V) +/-0.1 V
                                                      and 50 to 650 V range: +/-0.006 (R-230 V) +/-1 V
Span tempco: +/-0.01% of reading/C
Step response: 1 s
Warmup to rated accuracy: 10 min

Analog-to-Digital Conversion:
Technique: Dual-slope, average-value
Read rate: 2.5/s
Integration period: 100 ms

Display:
Type: 7-segment, red LED Height: 0.56" (14.2 mm)
Symbols: 1.8.8.8
Decimal points: Three positions programmable internally or at connector, 10 mA average sink
Overrange indication: Three least-significant digits blank

Digital Controls:
HOLD and TEST inputs: TTL or 5 V CMOS compatible

Power:
AC voltages: 115 or 230 Vac +/-15%
AC frequency: 49-440 Hz
DC voltages: 9-32 Vdc, isolated to 300 Vp; 26-56 Vdc, isolated to 300 Vp
Power consumption: 2.4 W (nominal)
Output voltages: +4.7 Vdc and -4.6 Vdc +/-5%, 10 mA max

Environmental:
Operating temperature: 0 to 60C
Storage temperature: -40 to +85C
Relative humidity: 95% at 40C (non-condensing)

Mechanical:
Dimensions: NEWPORT® DIN2A (short 1/8 DIN) case (See mechanical section for drawings)
Weight: 14 oz (400 g)
Case material: 94V-0 UL-rated polycarbonate

Signal Input
Range
199.9 Vac
650 Vac
Resolution
100 mV
1 V
Overvoltage protection
650 Vac
650 Vac
Input resistance
1 M ohm
1 M ohm
Bias current
1 pA
1 pA
Configuration: Half-wave average, RMS-calibrated
Zero: Automatic
Frequency: 49-440 Hz

Product Reviews

(0 Ratings, 0 Reviews)