Martel BetaGauge BG301 Pressure Calobrator

Martel BetaGauge 301 Pressure Calibrator

The BetaGauge 301 is a general purpose, valueoriented pressure calibrator. With one internal pressure range and available adapter for external BetaPort-P pressure modules, the possibilities are extensive. Available Ranges and Engineering Units. The available internal sensor ranges are: 1, 5, 30, 100 and 300 PSIG Note: 30 and 100 PSI ranges are calibrated from -12 PSI to full scale. Pressure may be displayed in the user's choice of engineering units, which include:

• PSI • Bar • mBar
• kPa • MPa • kg/cm2
• cm H2O @ 4 Deg C • cm H2O @ 20 Deg C
• cm H2O @ 60 Deg F • m H2O @ 4 Deg C
• m H2O @ 20 Deg C • m H2O @ 60 Deg F
• in H2O @ 4 Deg C • in H2O @ 20 Deg C
• in H2O @ 60 Deg F • ft H2O @ 4 Deg C
• ft H2O @ 20 Deg C • ft H2O @ 60 Deg F
• mm Hg, in Hg • USER defined unit

Features - Martel BG-301:
• One isolated pressure sensor
• External pressure module connection( BetaPort-P pressure modules 25+ ranges)
• Internal 24 V DC loop power supply
• Measure 24 mA or 30 V DC
• Large, backlit, configurable display for 1, 2 or 3 variables
• Switch test on Pressure (internal or external)
• Five (5) frequently used setups can be saved
• % error and damping functions
• Compact handheld design
• Powered by 4 AA Alkaline batteries

Specifications - Martel BG-301:

Pressure Accuracy:	All ranges +/-0.05% FS
DC Measure Accuracy:	mA +/-0.015% of rdg; +/- 0.002 mA Volts +/-0.015% of rdg; +/-0.002 V
Temperature Effect:	No effect on accuracy from 18 Deg to 23 Deg C Add +/-0.005% FS/ Deg C for temp outside range
Operating Temp:	-10 Deg to +50 Deg C
Power:	Battery Four (4) AA Alkaline cells
Battery Life:	>35 hours continuous typical usage
Dimensions:	8.3" H x 3.9" W x 1.8"D (21 cm H x 10 cm W x 4.6 cm D)
Weight:	1 lb., 4 oz. (0.57 kg)
Connectors/Ports:	Pressure (1) 1/8" FNPT BetaPort-P pressuremodule Std. banana jacks for mA and V

Each unit includes Soft case, batteries, manual, factory calibration certificate, test leads

The BetaGauge 301 is also available in a kit (K Option in Model Number) that includes the calibrator base package with a hard case, tubing, fittings and a pneumatic pressure calibration pump. Based on the pressure range the calibration pump is either the MECP100 or MECP500.