Hanna HI 9033 Waterproof Conductivity TDS Meter

Hanna HI 9033 Waterproof Conductivity TDS Meter

The HI 9033 is a rugged meter designed to hold up under extended use in wet, humid, dusty and muddy conditions. It utilizes a single probe, and performs conductivity readings in all four ranges. It can measure samples from deionized water to brine without having to switch or recalibrate the probe!

The HI 9033 performs measurements with ATC (automatic temperature compensation) which adjusts for the effects of temperature on the probe. It also features BEPS (Battery Error Prevention System) technology that alerts the user when low batteries could affect the readings.

HI 9033 is supplied complete with HI 76302W probe with internal temperature sensor and 1m (3.3') cable, calibration screwdriver, battery, rugged carrying case and instructions.

Range 0.0 to 199.9 micro S/cm;
0 to 1999 micro S/cm;
0.00 to 19.99 mS/cm;
0.0 to 199.9 mS/cm
Resolution 0.1 micro S/cm;
1 micro S/cm;
0.01 mS/cm;
0.1 mS/cm
Accuracy +/-1% F.S. (excluding probe error)
Calibration manual, 1 point
Temperature Compensation automatic, 0 to 50 Deg C (32 to 122 Deg F) with Beta =2%/Deg C
Probe HI 76302W, ATC, with 1 m (3.3') cable (included)
Battery Type / Life 1 x 9V / approx. 100 hours of continuous use|
Environment 0 to 50 Deg C (32 to 122 Deg F); RH max 100%
Dimensions 196 x 80 x60 mm (7.7 x 3.1 x 2.4")Weight 425 g (0.9 lb.)