Want to compare sizes? These little meters pack more
features than some DMMs twice their size. True-rms ac
voltage and current readings, for example. 6000 count
resolution. Min/Max/Average. And frequency and capacitance
capabilities. Plus they give you an easy-open battery access
door. They’re all CAT III rated for 600V and are protected by
a three-year warranty. The 112 model has a backlight and
delivers 0.7% basic dc accuracy. The price? They’re less than
you think. Yes, smaller is better. Definitely.

FEATURES:

• True-rms ac voltage and current (Model 111 and 112)
      for accurate readings on all waveforms
• 6000 count display provides improved resolution
• Min/Max/Average recording
• Frequency, capacitance & resistance capabilities
• 112 has a backlight to illuminate the screen in dark workspaces
• Easy access battery door to change the battery without
      breaking the calibration seal
• Drop protected to 1 meter, 3 Year Warranty
• Holster with probe holders for better test lead management
• Compatible with ToolPak™ magnetic hanging kit
• Compact & lightweight for use on the go
• IEC CAT III 600V Safety Rating
  
  

  Fluke 110 Series DMM Features
  	110	111	112
  Basic DC accuracy of 0.7%	•	•	•
  6000 count display	•	•	•
  Manual reading hold for user convenience	•	•	•
  IEC 1010 rating: CAT III 600V	•	•	•
  Compatible with Fluke ToolPak meter hanging kit	•	•	•
  Backlight for measurements in low visibility areas			•
  Battery access without breaking the calibration seal	•	•	•

  
  
  

  General Specifications
  AC Amps*	Range: 3.00A to 10.00A Accuracy: +/- (1.5% of reading plus 3 Cts) Not specified below 3A Crest Factor: <= 3 AC Response: 50 Hz to 500 Hz
  DC Amps*	Range: 0.001A to 10.00A (20A overload for 30 seconds) Accuracy: +/-(1.0% of Rdg plus 3 counts)
  AC Volts	Range: 300 mV to 600.0V rms Accuracy: +/-(1.0% of Rdg plus 3 counts) AC Response: 50 Hz to 500 Hz
  DC Volts	Range: 1 mV to 600.0V Accuracy: +/-(0.7% of reading plus 2 Cts)
  Ohms	Range: 0.1 Ohm to 40.00 M-Ohms Accuracy: +/-(0.9% of Rdg plus 1 Cts)
  Capacitance	Range: 1 nF to 9999 uF Accuracy: +/-(1.9% of Rdg plus 2 Cts)
  Continuity	Beeper guaranteed on <20 Ohms guaranteed off > 250 Ohms; detects opens or shorts of 250 us or longer
  Frequency	Range: Voltage Input - 5 Hz to 50 kHz Current Input - 50 Hz to 5 kHz (111 and 112 only) Accuracy: +/-(0.1% of Rdg plus 2 counts)
  Note	The 110 Series is not recommended for use with AC current clamps.

  ^* Not applicable for the 110