| | |
|
| |
| | |
|
|
Fluke FoodPro Food Safety Thermometers
|
Item Number: FLUKE-FP
Manufacturer: Fluke
Part Number: FLUKE-FP
* Whole number only
|
|
Fluke FoodPro Food Safety Thermometers
Fluke brings its test and measurement equipment expertise to the foodservice industry with contact and non-contact temperature measurement solutions. The new Fluke FoodPro Thermometer Series provides a complete temperature measurement and monitoring solution for foodservice professionals. It includes two useful temperature inspection tools, which are designed to enable foodservice professionals to quickly and accurately measure food product temperatures and to help detect potential food safety problems.
The Fluke FoodPro non-contact thermometer is the first line of defense against improper receiving, storage and holding temperatures. Using an infrared measurement technique, the highly accurate FoodPro quickly reads surface temperatures, allowing workers to make rapid and frequent temperature measurements – faster than contact units and without fear of cross contamination. The easy-to-see illumination light shows you the measurement area.
Both FoodPro Series thermometers are hand-washable and feature unique HACCP check lights, which immediately indicate safe or potentially unsafe holding temperatures with either green or red lights.
Fluke FoodPro Features:
-
Infrared temperature range from -35 to 275 ºC
-
HACCP check lights for instant recognition of safe/unsafe temperatures
-
LED target illumination highlights the entire measurement spot for accurate targeting
-
Hand washable (IP54 sealed)
Fluke FoodPro Applications:
-
Receiving: Use FoodPro Series thermometers to quickly verify proper temperatures of food products at the point of delivery as recommended by your HACCP program.
-
Food holding: Easily monitor hot and cold food holding. HACCP check lights provide instant recognition of safe/unsafe temperatures.
-
Inspection: Conduct food line inspections daily to ensure compliance with local food temperature monitoring requirements.
-
Equipment Calibration: Verify proper operating temperature of coolers, freezers, grills, fryers, warmers, as well as hot and cold storage units to avoid inconsistent food service, costly spoilage and to allow quicker response, reducing equipment repair costs.
-
Dining room: Easily verify temperatures in every aspect of food serving to ensure safety, enhance quality and reduce waste.
Fluke FoodPro Specifications:
| Infrared Specifications |
| Temperature |
-30 °C to 200 °C |
| Accuracy |
(Assumes ambient operating temperature of 23 °C ±2 °)
Between °C and 65 °C ±1 °C
Below 0 °C : ±1 ° ±0.1 degree/degree
Above 65 °C: ± 1.5% of reading
|
| Response Time |
<500 ms after initial reading |
| Spectral Response |
8-14 microns |
| Emissivity |
Pre-set for foodservice applications |
|
Distance to Spot size/Optical
Resolution (D:S)
|
2.5:1 @ 90% energy, typical |
|
Typical Working Range
(target illumination)
|
~25 mm to 250 mm |
| Minimum Target Size |
12 mm ø |
|
Illumination to IR
channel offset
|
13 mm |
| Operational Specifications |
| Repeatability |
Within accuracy specifications of the unit |
| Avbient Operating Range |
0 °C to 50 °C |
| Relative Humidity |
90 % (± 5%) RH non condensing @ 30 °C |
| Storage Temperature |
-20 °C to 60 °C |
| Weight |
100g (with battery) |
| Dimensions |
150 mm x 30 mm x 50 mm |
| Power, battery life |
1 AA alkaline |
| Battery Life |
Alkaline 10 hours minimum @ 23 °C |
| Target Illumination |
Highbrightness LED |
| Display Resolution |
4 digits, 0.2 °C |
| Displayhold (7 seconds) |
Yes |
| LCD Backlight Display |
No |
| Temperature Display |
4 digits, 0.2 °C resolution |
| Maximum Temperature Displayed |
No |
| Timer |
No |
| Environmental Data |
IP54 sealing (hand-washable, non-subersible) |
| Other Specifications |
| Standards |
Conforms to EN 61236-1 Electromagnetic Emissions and
Susceptibilty, EN 6101-1 General Safety, Sealing IP54 (hand washable, non submersible)
|
| Certifications |
CE NSF |
| Warranty |
2 Years |
|
Our Price: $259.95
Sale Price: $233.96
The Fluke FoodPro Plus combines an infrared non-contact thermometer for surface scans with a probe thermometer for internal temperature readings. An integrated countdown timer with alarm monitors line checks as well as cooking and cooling intervals.
| |
Product Reviews
|
|