Fluke 355 True-RMS 2000 A Clamp Meter

Fluke 355 True-RMS 2000 A Clamp Meter

                     

The extra-wide jaw easily clamps around large conductors, typically found in high current applications. The rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of protection when taking high-powered measurements.  Accurate peak measurements can be taken using the in-rush current mode - ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this the most versatile tool for utilities, electrical contractors and industrial service technicians.
                  

• True-RMS measurements
• Display backlight
• Motor start-up current
• Min/Max/Average
• Voltage AC/DC
• Resistance measurement
• Continuity measurement with beeper
• The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors
• CAT IV 600 V, CAT III 1000 V rating for added user protection
• In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability
• High voltage measurement of 1000 V ac + dc true-rms, 600 V ac, and 1000 V dc allows the user to perform multiple tests with only one tool
• Resistance to 400K ohms coupled with a continuity beeper provide the convenience of a multimeter in a clamp meter. 
• Accurately measure frequency up to 1 kHz for optimum troubleshooting
• Quickly analyze readings using the MIN, MAX, and AVG functions
• A large backlit display allows for easy visibility in low-lit areas
• Use the display hold feature to capture readings even when the display cannot be viewed
• Use the low-pass filter to smooth out noisy loads and stabilize readings

Specifications:

Includes:

• 355 clamp meter
• C43 Soft carrying case
• 6 AA batteries
• TL224 1.5 m silicone rubber test leads
• TP2 Test Probes
• AC285 Alligator Clips
• User manual