|
|
Ametek-Jofra ETC-400A Dry Block Calibrator (28 to 400 C)
|
Hart Scientific 9100S HDRC Dry Block Calibrator (33 to 300 Deg C)
|
Techne UCAL 400+ Dry Block Temperature Calibrator heats up to 430 Deg C
|
The Ametek Jofra ETC-125A Dry Block Calibrator cools to -10 C and heats to 125 C
|
The Techne Tecal 425F is designed to calibrate temperature sensors in the range of ambient +20 C to +425 C.
|
Hart Scientific 9102 -10 to 122 C Dry Block Calibrator
|
Hart Scientific 9140 has a temperature range of 35 C to 350 C, and it reaches its maximum temperature in 12 minutes.
|
Ametek JOFRA MTC-320 A Range: 50 to 320°C (122 to 608°F)
|
Ametek Jofra CTC-320A Dry Block Calibrator (33 TO 320 C)
|
Ametek JOFRA MTC-650 A Range: 50 to 650°C (122 to 1202°F)
|
Ametek Jofra CTC-650A Dry Block Calibrator (33 TO 650 C)
|
Ametek JOFRA MTC-140 A Range: -17 to 140°C (-1 to 284°F)
|
Ametek Jofra CTC-140A Low Temp Dry Block Calibrator (-17 TO 140 C)
|
Hart Scientific 9103 covers below-ambient temperatures as low as -25 C. The 9103 is stable to +/-0.02 C, and its display is calibrated to an accuracy of +/-0.25 C at all temperatures within its range.
|
The Tecal 650F can be used to calibrate temperature sensors from a range of ambient +25 C to +650 C.
|
The Tecal 140F calibrates sensors in the temperature range of -45 C below ambient to +140 C.
|
Field Metrology Wells are packed with functionality and are remarkably easy to use. They are lightweight, small, and quick to reach temperature set points, yet they are stable, uniform, and accurate.
|
Ametek Jofra CTC-320B Dry Block Calibrator (33 TO 320 C) with Deep 7.5" Well
|
The Hart Scientific 9144 field metrology wells are packed with functionality and are remarkably easy to use. They are lightweight, small, and quick to reach temperature set points, yet they are stable, uniform, and accurate.
|
Ametek Jofra CTC-650B Dry Block Calibrator (33 TO 650 C) with Deep 7.5" Well
|
The Tecal 425H calibrates sensors in the temperature range of ambient +20 C to 425 C (797 F).
|
Hart Scientific 9009 Hot & Cold Dry Block Calibrator
|
The Hart Scientific 9142 field metrology wells are packed with functionality and are remarkably easy to use. They are lightweight, small, and quick to reach temperature set points, yet they are stable, uniform, and accurate.
|
Ametek Jofra ITC-320A Dry Block Calibrator (33 to 320 Deg C)
|
Ametek Jofra ITC-650A Dry Block Calibrator (33 to 650 Deg C)
|
Ametek Jofra ITC-155A Low Temp Dry Block Calibrator (-23 to 155 Deg C)
|
The Fluke Model 9172 provides temperatures from 35 °C to 425 °C with a calibrated display accurate to ±0.2 °C at 425 °C. In addition to exceptional accuracy, the 9172 is stable from ±0.005 °C to ±0.01 °C, depending on temperature.
|
|
|