| | |
|
| |
| | |
|
|
Additel ADT 919 High Pressure 2000 PSIG Pnuematic Calibration Pump
|
Item Number: ADT919
Manufacturer: Additel Corporation
Part Number: ADT919
|
|
Additel ADT 919 Pneumatic High Pressure (-14 to 2000 PSIG) Calibration Test Pump
The Additel ADT-919 pneumatic high pressure calibration test pump is a hand operated pressure pump designed to generate pressures from -14 psi (-0.95 bar) to 2000 psig (+140 bar). With a long lever, it just takes 30 seconds to reach 2000 psig (140 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar). A specially designed shut-off valve make the pressure as stable as possible during calibration. A built-in gas-liquid isolator protects the pump from moisture and dirt to reducing the need for maintenance. Two hand-tight connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for thread tape or wrenches. The ADT 919 is an ideal comparison test pump for pressure instruments calibration.
Features - Additel ADT-919
• High Efficiency - Generates 2000 psig (140 bar) in 30 seconds with clean dry air
• Increase Plant Safety - Stop carrying those dangerous high pressure Nitrogen cylinders around your plant
• High Resolution - 10 Pa (0.1 mbar/0.04" Water) Specially designed screw press for fine pressure adjustment
• Great Stability - A specially designed shut-off valve makes the pressure as stable as possible during calibration
• Durable and Minimal Maintenance - Built-in gas-liquid isolator protects the pump from moisture and dirt. The residual liquid in the pump introduced from devices under test will be pushed out and collected during pressure release
• Easy-to-use - Pressure could be set and adjusted precisely and quickly through a simple turn of the handle
• Hand-tight Connectors - Allows for quick and easy connection to the pump without the need for thread tape or wrenches
|
Product Reviews
|
|